Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)
Water Revival System™ - Travel / Portable (WRS-TP4)

Water Revival System™ - Travel / Portable (WRS-TP4)

Water Revival System™ - Travel / Portable (WRS-TP4)

Regular price $1,195.00
/



 MANUAL   SPEC SHEET   CERTIFICATE OF ANALYSIS

 

 

PRODUCT FEATURES:

  • Step-by-Step Installation Manual
  • Proudly made in the USA  
  • Approximately one year until first filter change
  • Produces 1 gallon approximately every 15 min
  • 150 GPD Rated Membrane
  • Precision water saver filters 1 to 1 waste to recovery
  • John Guest quick connect fittings with locking clips
  • Diverter Valve faucet attachment with adapters (no plumbing necessary)
  • TDS meter to check water quality and monitor filter-life

DIMENSIONS:  

H 8" x W 18.5" x D 15"

DRY WEIGHT:  
24 lbs 

Learn more about the PristineHydro® Travel-Portable WATER REVIVAL SYSTEM™

WATER REVIVAL SYSTEM™ FAQ

Do you have a list of all the chemicals that your WATER REVIVAL SYSTEM™ filters out?

arrow-icon

Yes! Take a look at our latest comprehensive report:Certificate of Analysis July 2022 to view all specific chemicals and minerals filtered out by our Water Revival Systems™. ALSO - We just completed a special report focused on the identification of 18 plastic compounds (PFAS Contamination):Certificate of Analysis July 2022

What are the minerals included in this "properly mineralized process that you highlight as one of the most important features?

arrow-icon

Our unique filtration process includes stages that help increase the benefits of this ultra-filtered water, including remineralization with low controlled TDS comprised of magnesium bicarbonate with traces of calcium and sodium bicarbonate, as well as silica and chloride. The water is naturally restructured and recharged through Coconut Carbon filtration, lodestones, and crystal quartz.

Does the water revival system have high water waste when using reverse osmosis to filter water?

arrow-icon

PristineHydro®utilizes a High-Efficiency Reverse Osmosis Membrane that has a waste-to-recovery rate of 1 to 1, a very high-efficiency rate. The ratio for Water Ionizers is about 1 to 3; it's hard to imagine using such acidic wastewater, which should not even come into contact with human skin.

Is this safe for pets to drink?

arrow-icon

Yes absolutely! Dogs, cats, and birds can enjoy every drop of Pristine water. However, we do not recommend this for reptiles or fish tanks as they need certain minerals beneficial to their species that are not present in our remineralized water.

A part arrived broken; how do I get it replaced?

arrow-icon

If, for some reason, a piece of the system came broken or required a replacement, don't hesitate to contact us during store hours via email (preferred) or by phone. Provide your name, order number, shipping address, and a description and picture of the broken part that needs replacement.

When should I expect to be replacing my filters?

arrow-icon

Most customers prefer to replace filters proactively to maintain PRISTINEHYDRO® water quality standards rather than wait for complete filter component degradation. Average Service Life is based on “normal” usage and average feed water quality. Actual filter life will vary with the frequency of use, total volume produced, and, most importantly, source water quality. If you are a heavy user or your water supply is of below-average quality, you may need to replace filters more frequently. We recommend periodically checking your system’s output water TDS and regularly replacing filters to maintain high system performance.Click Hereto view our recommended Filter Replacement schedule by Water Revival System™ type. You can purchase your specific replacement filters on our Website.

After I purchase, what if I have technical issues with your Water Revival System™, is there a go-to protocol for this?

arrow-icon

Great question, if you or your installer has any technical issues with your Water Revival System™, check out our Troubleshooting Guide.

What is the note on page two of your comprehensive certificate of analysis re: Surrogates referring to?

arrow-icon

These are chemicals that the testing company puts into the sampling bottles that preserve water. They act as a surrogate to carry any potential plastics that may be hiding within the water. Link to our 2022 Certificate of Analysis for the PristineHydro Water Revival System in case you've yet to download.

Travel/Portable WATER REVIVAL SYSTEM™ Product Features

• Step-by-Step Installation Manual  

• Proudly made in the USA 

• Approximately one year until the first filter change 

• Produces 1 gallon every 15 min (on average)

 Precision water saver filters

• John Guest quick connect fittings with locking clips

• Diverter Valve faucet attachment with adapters (no plumbing necessary)

 TDS meter to check water quality and monitor filter-life


DIMENSIONS: 

H 8" x W 18.5" x D 15" 

Travel-Portable WATER REVIVAL SYSTEM™ Product Maintenance

The 150 gpd rated high volume High-Efficiency Reverse Osmosis Membranes have a waste to recovery rate of 1:1, which means that for every one gallon of water that is made, one gallon goes down the drain. 

Note: Most reverse osmosis systems have a waste to recovery rate of five to one, meaning that five go down the drain for every gallon made.

Many people like proactively changing filters to maintain high system performance rather than waiting for degradation. 

We suggest changing the 5 Micron, KDF + Carbon every 12 months and the Deionization filters every 24 months, depending on usage and the TDS of the source water. 

The High-Efficiency Reverse Osmosis Membrane and Remineralization cartridge (which includes the Coconut Carbon stage) should be changed every 36 months; again, it depends on usage and the TDS of the source water.

All of our PristineHydro® WATER REVIVAL SYSTEMS™ have a Flush Valve, which dramatically extends the life of the High-Efficiency Reverse Osmosis Membrane. 

Once a month (depending on usage, more often if you are making a lot of water), open the Flush Valve for 2-3 minutes while the unit makes water. When you open the Flush Valve, you should hear a flushing sound; this flushes out deposits in the membrane.

Recently viewed